-
Posted: 2016/07/19 | Categories: Industry News
The Zallaq Harbour Project value BD1.39 million ($3.68 million) is going well in Bahrain. The project was awarded to Down Town, will cover block 733 in Nasfa and part of Block 743 in Sanad.
The scope ...
-
Posted: 2016/07/12 | Categories: Industry News
Keppel Shipyard in Singapore, a subsidiary of Keppel Offshore & Marine, has awarded four new contracts worth about S$120 million ($89 million).
The first contract is from BW Catcher Limited, a wh ...
-
Posted: 2016/06/12 | Categories: Deers' News
55pcs of ID500*OD1000*L1500mm cylindrical rubber fenders finished the delivery last week. Before the delivery, visual inspection and compression testing are made under the supervision of BV in our fac ...
-
Posted: 2016/04/06 | Categories: Deers' News
OD400*ID200*L1500mm Cylindrical rubber fenders with chains have been delivered to Mombasa port, Kenya.. And our cylindrical rubber fender had passed the test by SGS.
...
-
Posted: 2016/03/29 | Categories: Deers' News
Pneumatic rubber fender is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber to protect the ship body and its co ...
-
Posted: 2016/03/17 | Categories: Deers' News/ Exhibition
Nanjing Deers is exhibiting marine rubber fenders and pneumatic fenders at APM2016 in Singapore during Mar 16th to 18th/ 2016. Our products are approved by customers from Asia, Europe, Middle East and ...
-
Posted: 2016/03/11 | Categories: Deers' News/ Exhibition
We NanJing Deers sincerely invite you to visit our booth in the Asia Pacific Maritime Exhibition, which will be held in Singapore from Mar.16th to 18th /2016. Our booth No. is A-T41 of Hall A.
Asia Pa ...
-
Posted: 2016/03/11 | Categories: FAQ
Yes. We can provide samples for testing.
...
-
Posted: 2016/03/11 | Categories: FAQ
According to your order, we deliver the fenders timely.
...
-
Posted: 2016/03/11 | Categories: FAQ
Yes. we have BV,DNV,ISO, CCS.
...
-
Posted: 2016/03/11 | Categories: FAQ
A: Every fender is under the rigorous process and test for every step since the raw material until to the package.
...
-
Posted: 2016/03/11 | Categories: FAQ
A: Of course, we accept OEM and ODM. you just need to offer your drawing, we can design it for you.
...