-
Posted: 2020/11/16 | Categories: Industry News
The main function of the fender panel is to distribute the reaction forces from fender units into the ship’s hull, so the designs should be suit each individual berth.
The loads and stress load ...
-
Posted: 2020/11/13 | Categories: Industry News
Marine bollards are a simple and cost-effective way to meet mooring requirements and safely secure vessels alongside wharves, jetties, berths, and dolphins in ports and harbors. Bollards with a series ...
-
Posted: 2020/11/11 | Categories: Industry News
The initial cause of damage to the dock rubber fender lies in the three aspects of design, construction, and use management. As long as these three aspects are done well, the damage to the rubber fend ...
-
Posted: 2020/10/23 | Categories: Industry News
Floating fenders utilize the compressibility and elasticity of air to ensure highly consistent performance. Taking the pressure off in a variety of environments these versatile fenders maintain a larg ...
-
Posted: 2020/10/14 | Categories: Industry News
Mooring equipment on ship is arguably the most often used hardware. Whether you’re tying your boat down at the dock or putting it away for the night in its permanent spot, the equipment you use ...
-
Posted: 2020/09/28 | Categories: Industry News
Cylindrical rubber fenders Properties
Cylindrical rubber fender has the properties of low reaction force, small pressure surface, and reasonable energy absorption. When berthing, it has strong adapta ...
-
Posted: 2020/09/21 | Categories: Industry News
Foam filled fender is one of the floating rubber fender systems in the world now, they are widely used on ships, bridges, open ports, dolphin wharves and etc. Foam filled fender consists of an interna ...
-
Posted: 2020/09/11 | Categories: Industry News
Pneumatic Fenders are the ideal choice for inter ship dealings and port accessories. It’s made of the strong rubber sheet with synthetic-cords. The compressed air inside can keep pneumatic fende ...
-
Posted: 2020/09/04 | Categories: Industry News
Tugboat fenders are highly wear-resistant rubber fenders used to protect ships and other surfaces during contact. Boat fenders are also called boat bumpers, rubber fenders, and marine fenders. For sta ...
-
Posted: 2020/08/27 | Categories: Industry News
Introduction of ship airbags
Ship airbags are used wildly in many shipyards for ship launching and hauling out the heavy lifting, and ship salvage. The application of marine airbags is less restricted ...
-
Posted: 2020/08/24 | Categories: Industry News
Oil spill specific situation
On the evening of July 25, local time, the Japanese bulk carrier Wakashio, flying the Panamanian flag, 300 meters long and 50 meters wide, and carrying more than 3,800 ton ...
-
Posted: 2020/08/07 | Categories: Industry News
RankPort2020.1-6m MteuGrowth1Shanghai2006-6.90%2Ningbozhoushan13 ...
