How to install arch fender?
Arch Fender Installation
The following procedure is common for all types of DEERS V and I-V fender assembly and installation. The actual fender design may vary depending on the situation.
 |
1.Check the template with the fender bolt pattern, bracket, and other bolt parts.According to the design accurately positioned on the structure. |
 |
2.Prepare work areas away from cutting, grinding and other potentially hazardous operations. Place the Arch type fender on its flange and allow them to recover from the small twist caused by the transport process, which will help anchor the back. |
 |
3.In the front and inside of the fender through the soft sling, away from the flange. |
 |
4.Raise the V-shaped fender from the sling and be careful not to damage the rubber. Place the protective material at the end of the rotating baffle. |